Company | Alloys | Services | Products | Ordering | Contact
Profile Capabilities News Site map
Rolling Bar forging Press forging Forgeable alloys
Waterjet Cutting
Request quote All Alloys - high temperature HASTELLOY alloy X (HX) INCONEL alloy 625 INCONEL alloy 718 INCONEL alloy 601 HAYNES alloy 25 (L605) NITRONIC 60 - corrosion resistant HASTELLOY alloy C-276 MONEL alloy K-500 INCONEL alloy 625 INCOLOY alloy 25-6HN FERRALIUM alloy 255 NITRONIC 60 NITRONIC 50 HAYNES alloy 25 NITRONIC 30 - wear resistant HPA COBALT alloy 6B HPA COBALT alloy 6BH NITRONIC 60 NITRONIC 30
Product Catalog Quick Reference Bar Wire Sheet Plate Fasteners Forgings Corrosion resistant Wear resistant High temperature
Request quote Bar Inventory Plate Inventory Payment
Contact info Request quote Request info Order survey form Quote survey form

Alloys

 
  ^up all alloys corrosion resistant wear resistant high temperature forgeable  
 

Nickel 200 (UNS N02200)
Ni 99.0 C 0.15 Cu 0.25 Fe 0.40 Mn 0.35 Si 0.35 S 0.01

High Performance Alloys stocks and produces this grade in the following forms: Bar, wire, sheet, plate, coil, fasteners and forgings. Request quote on this grade. See our on-line catalog for sizes stocked

Overview

Commercially pure wrought Nickel with good mechanical properties over a wide range of temperature and excellent resistance to many corrosives, in particular hydroxides.

Good resistance to corrosion in acids and alkalis and is most useful under reducing conditions. Outstanding resistance to caustic alkalis up to and including the molten state. In acid, alkaline and neutral salt solutions the material shows good resistance, but in oxidizing salt solutions severe attack will occur. Resistant to all dry gases at room temperature and in dry chlorine and hydrogen chloride may be used in temperatures up to 550C. Resistance to mineral acids varies according to temperature and concentration and whether the solution is aerated or not. Corrosion resistance is better in de-aerated acid.

Applications

  • Manufacture and handling of sodium hydroxide, particularly at temperature above 300C.
  • Production of viscose rayon. Manufacture of soap.
  • Analine hydrochloride production and in the chlorination of aliphatic hydrocarbons such as benzene, methane and ethane.
  • Manufacture of vinyl chloride monomer.
  • Reactors and vessels in which fluorine is generated and reacted with hydrocarbons.

    Chemistry

    Chemical Requirements

    Ni

    C

    Mn

    Cu

    S

    Si

    Fe

    Max

    0.15

    0.35

    0.25

    0.01

    0.35

    0.40

    Min

    99.0

    Tensile Data

    Mechanical Property Requirements

    Ultimate Tensile

    Yield Strength (0.2% OS)

    Elong.

    R/A

    Hardness

    Cold Worked

    Min

    75 KSi

    50 KSi

    15

    Max

    Min

    515 MPa

    345 MPa

    Max

    Hot Worked

    Min

    55 KSi

    15 KSi

    40

    Max

    Min

    380 MPa

    105 MPa

    Max

    Specifications

    Form

    Standard

    Metal Type

    UNS N02200

    Bar

    ASTM B160 Din 17752 BS 3076

    Wire

    Sheet

    ASTM B162 Din 17750 BS 3072

    Plate

    ASTM B162 Din 17750 BS 3072

    Tube
    ASTM B622 ASTM B161 ASTM B163 Din 17740 BS 3074
    Pipe
    ASTM B622 ASTM B161 Din 17740 BS 3074

    Fitting

    ASTM B366

    Forging

    ASTM B564

    Weld Wire

    ERNi-CI

    Weld Electrode
    ENi-1
    NA 11
    All forms
    Din
    2.4066 All forms

Machining

Machinability Ratings

MACHINING DATA
Carbide tools are suggested
for rates better than 50% of Type 304.
Machining Type Suggested starting rates are:
Single Point turning : Roughing - 0.15" depth, 0.015"/rev feed -175 SFM
Finishing - 0.025" depth, 0.007"/rev feed - 200 SFM
Drilling : 1/4" Dia hole - 0.004"/rev feed - 60 SFM
1/2" Dia hole - 0.007"/rev feed - 60 SFM
3/4" Dia hole - 0.010"/rev feed - 60 SFM
Reaming : Feed - same as drilling - 100 SFM
Side and Slot Milling : Roughing - 0.25" depth - 0.007"/tooth feed - 125SFM
Finishing - 0.050" depth - 0.009"/tooth feed - 140SFM
These rates are for carbide tools,
Type C-2 for roughing, drilling and reaming.
Type C-3 for finishing.

 

 
 
   
 
©2007 High Performance Alloys, Inc. Reproduction of this site in whole or part is prohibited without the expressed permission of High Performance Alloys.
ISO 9001:2008 Registered Manufacturer & Distributor. Please read our product Disclaimer and Terms & Conditions
Share |